Fall Riding Gear

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Comfortable ride - Classic colors

- Chromed steel with leather cover - Ideal for classic bikes or today’s fixies - Tubing diameter: 4 mm

Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders

Comfort from the bottom up. Comfortable feet are crucial for successful training and racing, and details make the difference. Bontrager Race 1" low cycling socks eliminate bunching and wick moisture away from your feet so you can ride, train, or race all day. Key features - Profila Dry yarns provide excellent moisture transfer for dry, comfortable feet - Arch compression for a stay-put fit - Flat toe seam for toe box comfort - Knit-in size callouts for easy sorting after the wash - Low 1" (2.5cm) cuff

Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm

- Profila Merino Wool yarns are quick drying, naturally moisture wicking, and provide superior thermal properties, even when wet - Arch Compression for a stay-put fit - Flat toe seam for toe box comfort - Knit in size call outs for easy sorting after the wash - Taller 5" (13cm) cuff sits perfectly under leg warmers or tights

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders

Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

• Composite construction • Fits standard bottles

The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)

Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.

CatEye's nylon bottle cage is impact resistant and lightweight at just 29 grams.

Fear no bike commute with OnGuard's saddle and accessory tether. A sturdy steel cable with permanently fastened loops at either end provides a high degree of security for your bike. 5mm thick, flexible steel cable is tough as nails, and a vinyl coating protects your bike's paint from scratches.

Soft Merino wool keeps your feet and toes warm and dry in the Race Merino Wool Lightweight Crew Sock, a lightweight wool sock with excellent moisture-wicking ability! Wherever your bike takes you, this lightweight cycling sock will keep you comfy. - Merino wool yarns dry quickly, wick moisture, and have superior warmth - Memory-knit construction keeps your socks' form, wash after wash - Thin padding at heel, toe, and ball of foot for added comfort and breathability - Ribbed ankle provides compression and support - Mesh panels at top of foot provide additional breathability - Reinforced heel and toe for added durability - Taller, 5-inch (13cm) length

Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.

Tote your potables and never run out of water on the road! Designed to easily mount to your bike's bottle braze-ons these alloy cages are a must-have for commuters, couriers, and anyone spending enough time in the saddle to work up a thirst. - Light, durable, rust-proof, alloy - Perfect for most 16-22oz bike bottles - Bolts not included (use the ones on your frame)

Origin-8's Pro Lite Alloy Cage is made of light and durable aluminum and provides a secure grip on your bottles. It's perfect for all your bikes and adds a touch of class.

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

- .5L SKS water bottle - Made in Netherlands

- Universal alloy water bottle cage - Hardware included - Size: 6mm

- Rigid alloy construction - Weighs only 65.2 grams

JET is a biodegradable bottle made in food-grade squeezable polyethylene. The bottle has a sporty, sophisticated, and practical design that made it possible for us to achieve greater resistance for the bottle body while retaining unaltered its lightness and softness. Distinguished by an elegant and sinuous profile, the JET comes with a contoured bottle body with a smaller diameter for easier and improved handling, insertion, and removal of the water bottle under any circumstance. The standard 74mm diameter of the JET ensures it can be used with all the commercially available cages.

• Dual-density, lightweight PE and Kraton rubber bottle • Tasteless and odorless • Pull top valve • Bottle does not contain (Bisphenol A,BPA) or Phthalates • 24oz

- Lightweight and pliable LDPE bottle - Ultra-soft silicone high flow pressure valve - Tasteless and odorless - Bottle does not contain Bisphenol A (BPA) or Phthalates

"You gotta stay hydrated" has practically become a company motto over here, but we're happier, healthier, and more hydrated than ever—so it's working! Whether it's a long ride, a long day in the office, or a long wait in the checkout line—taking a swig from your handy bottle keeps your body happy and firing on all cylinders. These bottles deliver top-of-the-line thirst-busting, fight mold, odor, and other grossness, and taste just like sipping out of a glass. A glass that's soft and flexible and fits right on your bike. So drink up—and look good doing it!

- Rubber straps - Fit Raceblade, Mud-x - Set of 8

• Straight cable with PVC sleeve • One extra large loop • 3mm • Length: 2'6" • Cable only

- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)

Icon SS Water Bottle The Icon SS water bottle features a self-sealing cap for precise fluid flow and to prevent leakage. The body is improved with a softer BPA Free, Food Safe material allowing for better grip and fluid flow control. - Material: BPA Free, FoodSafe LDPE - Capacity: 21oz (621ml)

Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!

Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.

- .75L SKS water bottle - Made in Netherlands

The MSW PC-150 composite water bottle cages are a great value, providing easy use and are less likely to scratch the finish on most water bottles. - Composite construction - Does not include mounting bolts - Embossed MSW logo

• Four-digit combination • 4mm cable • Length: 3'6"

• Biodegradable bottle and cap • Easy to squeeze soft plastic, soft plunger • BPA free, California prop 65 compliant • Made in the U.S.A.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 712 Combination Cable. It's a 7mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.

Always on the go? Have a lot of stuff? The SteelBraid line is here to travel alongside you, on the road, at home, sports games or wherever you may go. 4' in length, the braided steel cable is sure to keep your gear safe. We added a vinyl coating to completely cover the cable and prevent rusting to protect your equipment. 12mm diameter with vinyl shell.

Keep feet toasty warm with the fast-drying, ultra-soft, moisture-wicking Race Merino Wool Crew Sock. This sock is ready for any ride and built to deliver long-lasting cushion and support for all-day comfort, no matter where your adventure takes you. - Merino wool yarns dry quickly, wick moisture, and have superior warmth - Memory-knit construction keeps your socks' form, wash after wash - Padding at heel and toe provide a balance of comfort and flexibility - Arch support and compression provides a comfortable, stay-put fit - Mesh panels at leg and top of foot provide additional breathability - Taller, 5-inch (13cm) length

Solstice Flat Bar Gel Cycling Glove is designed with a pad that fills the natural arch in your palm to create a seamless connection between hand and handlebar. We believe that no matter how long or short your ride, it deserves to be comfortable. This gel-padded glove is the perfect option for those shorter rides and pairs perfectly with flat handlebar bikes. - Silicone gel pad is specifically designed for comfort and palm support - Ergonomic pad shape fills the palm's natural arch for a seamless connection to bike - Faux suede palm provides great durability and texture for grip - Sleek pull-off feature on middle and ring finger makes glove removal easy - Soft nose wipe on thumb - Mesh back-of-hand for breathability and a comfortable fit - Pull-on wrist opening

Beat discomfort while tackling longer rides with the Vella Women's Twin Gel Cycling Glove. This padded bike glove uses strategically placed dual-density gel pads to add comfort and absorb road vibration. - Silicone gel and gel foam pads provide better comfort and vibration control - Optimal pad density and placement delivers better pressure distribution - Unique pad design reduces bulk while providing a better connection to the bike - Durable faux suede palm has perforations for added breathability - Sleek pull-off feature on middle and ring finger makes glove removal easy - Soft nose wipe on thumb

• Dual-density, lightweight PE and Kraton rubber bottle • Tasteless and odorless • Soft rubber bite pressure valve • Bisphenol A/BPA and Phthalates Free

The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)

- Constructed using a 6mm aluminum rod - Embossed MSW logo

Origin-8's Flask Cage is the cage you need to carry your Origin-8 Flask (sold separately). It's made of durable and light aluminum to hold your Flask securely and keep it right at hand.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 512 Combination Cable. It's a 5mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

The KryptoFlex 525 Seatsaver Cable is a 2.5-foot cable ideal for securing your bike's seat and seatpost. It's 5mm braided steel cable provides increased cut resistance and the vinyl coating protects bikes and equipment from scratches. The KryptoFlex 525 cable is 3/16-inch x 2.5-feet.

Perfect for anyone working on a bicycle, motorcycle or car, the Mechanics Gloves are designed to offer the hand total 360-deg comfort and protection against most cuts and scratches with minimal impact to dexterity. Gone are the days of taking the skin off your knuckles when removing a difficult to remove bolt or pedal! SIZE GUIDE: Small = 7.5 - 8" (19 - 20cm) Medium = 8 - 8.5" (20 - 21.5cm) Large = 8.5 - 9" (21.5 - 23cm) XL = 9 - 10" (23 - 25cm) (To find your size, measure the circumference around the knuckles excluding the thumb - your hand should be open with the fingers together).

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

Voda Flow is a premium water bottle with great in-hand feel and a Flow Top cap that offers lockable easy-squeeze hydration. The No-Drop Grip Ring adds a texture for a confident grasp even when wet, and it's all wrapped up with long lasting graphics that stay looking fresh for miles to come. Recyclable, FDA-approved materials are free from BPA's and Phthalates. - A premium bottle that provides great in-hand feel and consistent leak-free closure - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Manufactured in USA with long-lasting graphics that resist scratching

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

- Nylon bottle cage - Includes frame mount cage

Fiercely built for road warriors, the Breakaway bottle delivers quick hydration from the first mile to the last. Thirst has finally met its match. Don't let this reusable bottle's lightweight, compact design fool you. Our Breakaway bottle delivers effortless, reliable hydration to fuel your race days, recovery days, and beyond. Designed by cyclists for cyclists, the Breakaway's sleek form makes for effortless sipping and fits most bike cages. When pedal meets pavement, the high-flow, self-sealing Surge Valve delivers a blast of hydration without messy spills—keeping you focused on the bike path, trailhead, or road ahead. Chill out, drink up. Then get back in the saddle and enjoy the ride—despite the pain. - The Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free bike water bottle. The updated Breakaway water bottle features a sleek, single-wall design that is light, durable, and compact. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The new Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee. - Capacity: 0.59 L / 20 fl oz - Dimensions: 8.25 x 2.75 in. - Material: LDPE, TPU Valve - Weight 82 g / 2.9 oz

You know you are ready for action with these lightning bolt style 3 inch cuff socks. White bolt with dark red accent colors on a black sock. Show them lightning strikes twice when you slap these bad boys on your feet. Product Features: - Mesh upper for ultimate airflow. - Classic double-over cuff never falls down. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Double-stitched nylon heel & toe for durability and longevity. - Off-beat, original designs only SockGuy can provide! - Ultra-wicking acrylic base with superior softness and stretch to eliminate hot spots and blisters. - Cuff Height : 3" - Made with : Micro-Denier Acrylic - Style : Flat-knit; Standard